Athena Culture Kit
$7,499.00
Athena Tissue Culture Kit (Pre Order Special Price)
*Because of how heavy this order is “Pallet Shipping” will be calculated and invoiced manually*
Store and preserve all your cultivars in a very small space. The Athena Tissue Culture Procedure reinvigorates old genetics and cleans plant material to outgrow infections like hop latent viroid (HLV).
Culture Kit includes everything you need to learn and perform effective tissue culture anywhere you are. The portable Flow Hood and Autoclave are purpose built to perform consistent and clean tissue culture operations. An integrated toolbox contains all the tools, instruments and tissue culture media to make 120 Culture Vessels (refills available).
- Flow Hood provides a large workspace with face velocity of 0.5 – 0.9 m/s
- Purpose-built autoclave with one-touch sterilizing operation
- Contains pre-formulated tissue culture media mixes: Roots and Shoots
- Media formulas contain all ingredients, just add water
- Detailed step-by-step Procedure to perform successful tissue culture
USAGE INSTRUCTIONS
See Athena Tissue Culture Procedure integrated into toolbox lid.
Click here for TC Kit Procedures
Available on backorder
CompareRelated products
Natural Help From Natural Kelp
Athena AG Stack is a natural, high-quality, multi-purpose plant conditioner derived from kelp extract that promotes healthy growth and hearty flowering, and helps your plant reach it’s maximum flowering potential. Athena Stack can be used as a foliar spray and root drench that can help correct minor potassium deficiencies. It can also be used as a pre-transplant conditioner to help reduce stress and increase vigor, or a seed soak to help with germination rates and producing strong seedlings.
Handy Tips:
Instructions for use as a foliar spray or root drench: Apply once weekly from the final week of vegetative growth to week 4-5 of flowering, or once plants stop growing vertically. Cease foliar spray slightly earlier around week 3 of flowering.
Foliar Spray Directions: Mix 7ml per gallon (3.8L) water and spray thoroughly once weekly. Spray with lights off and allow to dry before turning on. Do not spray past week 3 of flowering.
Root Drench Directions: Mix 1-2ml per gallon (3.8L) of water in a weekly mix. Can be mixed with regular fertilizer recipe. Add last to reservoir.
Pre-Transplant Use: Mix 2ml per gallon (3.8L) water and bare root soak for 30-60 seconds prior to transplanting or water in solution after transplanting.
Seed Treatment: Mix 4ml per gallon (3.8L) water and soak seed for 1-2 minutes before sowing.
Athena Pro Line Mix Kit
Athena Mix Kit makes it easy and accurate to mix a concentrated fertilizer mix. Just add a single pouch to the matching 1 gallon just, fill with water and shake until fully dissolved. Look for Athena 10 lb Pro Line box for refill pouches.
Weighing powders is inaccurate and can lead to batches with different mineral compositions and ultimately plant deficiencies. It’s always better to mix a concentrate first before measuring into a batch tank or reservoir
This Ink Bird ITC-308 plug and play temperature controller comes with a temperature probe and ensures your grow space is maintained at the right temperature. Simply plug your humidity control peripheral like a fan, heater or dehumidifier and it’ll turn it on and off to maintain the right temperature. Maximum load is 10A. It has an audible alarm and can also display the ambient temperature. It can also be monitored remotely on via the Inkbird app as it’s wifi enabled. 12 Month warranty.
Main features
- Plug and play design, easy to use;
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
- Support reading with Centigrade or Fahrenheit unit;
- Maximum output load: 1000W(110V)/2000W(220V);
- Dual display window, be able to display measured temperature and set temperature at the same time;
- Temperature calibration;
- Compressor delay protection for refrigeration control;
- High and low temperature alarms are available;
- Over-temperature and sensor fault alarm;
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Specification
- Temperature Control Mode :On/Off Control, Heating and Cooling
- Temperature Control Range : -50~99 °C / -58~210 °F
- Temperature Resolution: 0.1 °C / 0.1°F
- Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
- Ambient Temperature: -30~ 75 °C / -22~ 167 °F
- Input Power: 100 ~240VAC, 50Hz/60Hz
- Temperature Control Output: Max. 10A, 100V ~240V AC
- Input Power Cable Length: 1.5m (5ft)
- Output Power Cable Length: 30cm (1ft)
- Buzzer Alarm: High and Low Temperature Alarm
- Sensor Type: NTC sensor
- Sensor Length: 2m / 6.56ft
- Relay Capacity: Cooling/ Heating (10A, 100-240VAC)
- Storage Temperature: -20~ 60 °C / -4~ 140 °F
- Storage Humidity: 20~85%
- Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Bluetooth enabled wireless temperature and soil moisture sensor that plugs into your phone directly or via Bluetooth to monitor your grow area and pot moisture levels.
4.53 KG / 10LB Box only – Includes 5 x 0.96KG Packets
Pro Core Is Pro Care
Athena Pro Core is a dry, fully soluble fertilizer, formulated as a baseline of essential micro and macronutrients your plant requires over all stages of growth to reach it’s full flowering potential. Athena Pro Core is used in combination with Athena Pro Grow during the vegetative phase, and then Athena Pro Bloom during flowering phase to obtain a balanced feed with optimum elemental levels.
Athena Pro Core provides readily available macro nutrients nitrogen and calcium, which are pivotal in the production of chlorophyll, amino acids, plant proteins, and healthy cell division with strong cell structure, while the micronutrients fill their roles in the other important plant processes like increasing photosynthesis, healthy enzyme production and activation, and other important metabolic processes essential for the highest quality yield. Athena Pro Core has a low heavy metal content, mixes fully at room temperature, and is ideal for mixing stock tanks and is compatible with all dosing systems.
Handy Tips:
It is not advised to mix the Athena Pro Line nutrients directly into your reservoir.
It is recommended to turn the Athena Pro Line nutrients into a concentrated liquid first, and then use the concentrate to mix your batch tanks.
Can be used in any growing media.