If you’re growing plants indoors, making sourdough, storing cheese or anything where you need to monitor and control the enviroment, then these peripherals are for you.
We have wifi and bluetooth enabled smart sensors, humidity controllers, temperature monitors are more! If you can’t measure it, you can’t improve it.
Showing all 6 results
Ink Bird IHC-200 Humidity Controller with Wifi$119.00
This plug and play humidity controller ensures your grow space is maintained at the right humidity. Simply plug your humidity control peripheral like a fan, heater or dehumidifier and it’ll turn it on and off to maintain the right humidity. Maximum load is 10A. It has an audible alarm and can also display the ambient temperature. 12 Month warranty.
Ink Bird ITC-308 Wifi Temperature Controller + Probe$129.00
This plug and play temperature controller comes with a temperature probe and ensures your grow space is maintained at the right temperature. Simply plug your humidity control peripheral like a fan, heater or dehumidifier and it’ll turn it on and off to maintain the right temperature. Maximum load is 10A. It has an audible alarm and can also display the ambient temperature. It can also be monitored remotely on via the Inkbird app as it’s wifi enabled. 12 Month warranty.
- Plug and play design, easy to use;
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
- Support reading with Centigrade or Fahrenheit unit;
- Maximum output load: 1000W(110V)/2000W(220V);
- Dual display window, be able to display measured temperature and set temperature at the same time;
- Temperature calibration;
- Compressor delay protection for refrigeration control;
- High and low temperature alarms are available;
- Over-temperature and sensor fault alarm;
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
- Temperature Control Mode :On/Off Control, Heating and Cooling
- Temperature Control Range : -50~99 °C / -58~210 °F
- Temperature Resolution: 0.1 °C / 0.1°F
- Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
- Ambient Temperature: -30~ 75 °C / -22~ 167 °F
- Input Power: 100 ~240VAC, 50Hz/60Hz
- Temperature Control Output: Max. 10A, 100V ~240V AC
- Input Power Cable Length: 1.5m (5ft)
- Output Power Cable Length: 30cm (1ft)
- Buzzer Alarm: High and Low Temperature Alarm
- Sensor Type: NTC sensor
- Sensor Length: 2m / 6.56ft
- Relay Capacity: Cooling/ Heating (10A, 100-240VAC)
- Storage Temperature: -20~ 60 °C / -4~ 140 °F
- Storage Humidity: 20~85%
- Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Inkbird Bluetooth Thermometer & Hygrometer Smart Sensor IBS-TH1 Plus$69.00
Bluetooth enabled wireless temperature and soil moisture sensor that plugs into your phone directly or via Bluetooth to monitor your grow area and pot moisture levels.
Combine with the WiFi gateway, to be able to monitor your sensors remotely via the app.
Remote Monitoring Combo$150.00
This combo is designed to allow you to monitor tent humidity and temperature levels via the Inkbird Pro app.
The M1 gateway connects to bluetooth sensors and broadcasts the data to the app via your wifi network (2.4GHz)
The gateway can connect to 4x bluetooth devices.
This combo includes:
1x IBS-M1 Wifi Gateway
1x Smart Sensor IBS-TH1
Free 3 Day Shipping.
Ink Bird IBS-M1 Wifi Gateway$99.00
Expand the abilities of your Bluetooth enabled devices like the IBS-TH1 temperature and humidity sensors by connecting them to your Wifi connection and onward to your phone, wherever you go via the Inkbird Pro app.
This gateway runs on 2.4GHz wifi networks. Check and set in real time. Max connection distance is 300ft. with no obstacles.
1 year warranty
Autopilot CO2 & Environment Monitor Data Logger (APCEM2)$325.00
CO2/RH/Temperature monitor on a clear display
Trend Chart: shows variable Min/Hr/Day/Wk for readings of CO2/RH/Temperature
2-Channel Low Drift NDIR (non-dispersive infrared) Gas Sensor
Audible alarm for low/high CO2 levels
Replenish CO2 Reminder: calculates time frame based on usage from past 5 days